The RF Device Development Kit ROCKWELL TOKYO (v1.1).
The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1). The RF Device Development Kit ROCKWELL TOKYO (v1.1).

The RF Device Development Kit ROCKWELL TOKYO (v1.1).

Brand: 1slon
Product Code: Rockwell Tokyo
Availability: In Stock
Price: $80.00
Qty:     - OR -   Add to Wish List
Add to Compare

The RF Device Development Kit ROCKWELL TOKYO (v1.1).

 

 

This module kit makes radio frequency technology quick, easy, simple, and affordable.

 

The easy-to-use RF Rockwell Tokyo kit helps developer create prototype of device for fast evaluation of design concepts and verification of device computer simulations.

 

The kit includes 12 RF full-functional modules (32 mm x 22 mm) with SMA connectors.

 

Download full user manual .pdf.

 

1 Dual channel RF signal generator with SWEEP, BEACON and USB OSCILLOSCOPE modes, 4 amplifiers, 1 switch,1 mixer, 1 bridge for the evaluation of various VSWR, 1 detectors combo, 2 attenuator boards, 1 dummy board. 1 SMA F to SMA F connector, 1 SMA F to SMA M extension cable, 1 50Ω RF load, 5 wires for power supply connection – all, what you need.

 

The kit features major modules that can be used for design, prototyping, experimenting and troubleshooting of the measuring, transceiver, and antenna technology. The kit modules generate or acquire RF signals within the frequency range from 10 to 3000MHz.

 

Set:

 

  1. Dual RF generator, 450 KHz - 200 MHz in 1 Hz resolution, is manageable and programmable via USB, memorizing the frequency set all parameters in nonvolatile memory.

        Generator Features:

  • 2 independent 15mW channels

  • Beacon

  • Sweep generator (sweeping frequency generator).

  • Power supply (+ 3.3V or +5V) for the other kit modules when connected to USB or other power sources.

  • By change firmware generator can be converted into USB oscilloscope Miniscope v2e ( http://tomeko.net/miniscope_v2e/ ).

  1. Low-noise amplifier LNA-5043 covers frequency range from 25 to 3000 MHz. It provides a gain from 10 dB (at 3GHz) to 20 dB (at 50MHz) with a noise figure of 1dB.

  2. High-power amplifier RFAMP AH-102 covers frequency range from 70MHz to 3000MHz. Its output power is 500mW for 50om load.

  3. General purpose amplifier RFAMP ERA based on ERA-1, 80-3000 МГц, gain 12 dB.

  4. Differential amplifier on AD8130 , 25 КГц — 1.5 МГц, gain 100.

  5. Высокочастотный коммутатор on uPG2179, 10-3000 МГц, 1W max.

  6. Mixer on SA612.

  7. Bridge for antenna measured HSMS2820, 0.1 -900 МГц, 50 ом.

  8. Diode detector HSMS2820, 0.5 — 2000 МГц

  9. Logarithmic detector on AD8314, 10-3000 МГц

  10. Attenuators 3, 6, 10 и 20 dB, 0-3000 МГц

  11. RF dummy board.

  12. Set wires for power supply.

  13. Connector SMA.F - SMA.F

  14. Extension cable SMA.M - SMA.F

  15. Load 50 Ohm (up to 1 ГГц).

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: